General-purpose plastic shredders, sealed bearings, bearing rotation for a long time to maintain good; knife design is reasonable, the use of alloy steel blade, uniform product into tablets; knife thermal processing, and undergo a rigorous test of balance, design nice shape . PE material for crushing the unique design of tube-type feeding port, easy to smash into a long bar tubing, improve work efficiency. Optional suction fan, storage tank crushing and recycling system composed of pipe can be more full recovery efficiency.
 
 Maintenance 1, plastic crusher should be placed ventilation, and ensure that the work of the motor heat dissipation, to prolong its life. 2, the bearing should be regularly filling oil to ensure lubrication between the bearings. 3, regular inspection tool screws, the new plastic crusher after a 1 hour, tightening the knife, fixed knife screws to strengthen fixity between the blade and the knife holder. 4, in order to ensure the sharpness of the incision tool, the tool should always check to ensure that its sharpness, reduce the blunt blade shortage caused unnecessary damage to other parts. 5, when a tool change, the gap between the knife and the fixed knife: 20HP more than the crusher 0.8MM better, 20HP following crusher 0.5MM better. Recycled material thinner, the gap may be appropriate to transfer large. 6, before the second start, you should first clear the machine room of the remaining debris, reduce starting resistance. Open the hood and should be regularly inertia pulley cover. 7, the machine should be kept well grounded. 8, regular inspection plastic crusher belt slack, timely tightening.